These decals are designed to fit perfectly in the colored portion of the RS emblem on the grille and trunk lid. The chrome border will remain exposed.
This is and official GM Licensed product.
Available in over 30 colors with a lifetime warranty.
- A quantity of 1 is for 2 (two) RS decals- 1 for the grille emblem, 1 for the trunk lid emblem.
Product Installation Instructions
General suggestions for the installation:
1. We recommend washing the entire car first. Next, clean the application areas (badges, indents, etc…) with rubbing alcohol several times to remove any other oil or dirt. Q-Tips help with cleaning out crevices. Be sure there is no alcohol or water on the badge during the decal application.
2. For best results, work in a relatively warm, dry area and allow the working surface to change to the room temperature before application. It's recommended to work in 50 ° F or warmer) temperatures.
Product-specific recommendations:
RS™ Badge Overlays
• The decal is sandwiched between the mask (clear cover) and the backing. Carefully peel away the backing. Line the decal up over the badge by looking through the mask. Be careful not to let the decal touch the badge until you are ready to apply.
• Align the left side of the R, then work your way to the right side of the S. Once the decal is in, press firmly to be sure most of it is stuck, then CAREFULLY remove the masking. Push down any part of the decal that may have come up with the masking or that's not stuck down yet. This is challenging to apply, so take your time!
Vehicle-Specific Decals & Shirts 
