Product Description

 Black the side markers out with black or carbon fiber or make them stand out with chrome or reflective colors.  Reflective colors have very high day AND night time visibility!  Available with over 30 color choices, two styles and a lifetime warranty.

These decals are designed to perfectly overlay the front and rear side markers on the 2010 Camaro.

Product Highlights
-----------------------------------------------------------------------------------------------------------------

• Solid Style: Covers the full side marker.  Outline Style: Outlines the edge. 
• Some colors are not 100% opaque and some light may still shine through.
• As the vinyl conforms to the shape of the lens, the DOT lettering will still faintly show through.
• Reflective colors will provide you with safety AND a good look!
  
• Check your local laws and listings.  These are for off-road use only as laws vary state to state.

• Sold as a pair.  Order a quantity of 1 to receive 2 side marker overlays.  Be sure to choose if you'd like them for the front, rear or both.
• Available in two styles- Solid or Outline.
  

We do NOT guarantee any of these colors will match the color of your Camaro.  Color samples are available at no charge per your request.  View our colors in the 'Color Chart' tab above.

Main picture above:  Solid Style in Reflective Black

General suggestions for the installation:

1. We recommend washing the entire car first.  Next, clean the application areas (badges, indents, etc…) with rubbing alcohol several times to remove any other oil or dirt.   Q-Tips help with cleaning out crevices.  Be sure there is no alcohol or water on the badge during the decal application.

2. For best results, work in a relatively warm, dry area and allow the working surface to change to the room temperature before application.  It's recommended to work in 50 ° F or warmer) temperatures.

Product-specific recommendations:

Side Marker Overlays

•  It is ABSOLUTELY ESSENTIAL that you thoroughly clean the side marker lenses with soap and/or rubbing alcohol prior to installation. Be sure to remove any dirt, especially on the edges. It will be beneficial to even run a Q-Tip (or put a cloth at the end of a flat-head screwdriver) and wipe out the edge between the side marker and body of the car. This step is imperative so the decal sticks to the edges.

•  Match up the decals to the vehicle, being sure you know which decal goes on which side of the car.

•  The decal is sandwiched between a clear masking and white backing. Carefully peel the decal away from the masking, holding it by the masking.

•  Line it up over the side marker lens, being careful the vinyl does not touch it until you are ready to apply.

•  Once you are sure of its position, press firmly. It's easiest to line up the left corners, then press down the decal starting at the top, aligning it as you.

•  Be sure to work out any air bubbles that may have formed in the center. You can poke them with a small pin, then work the air out if you have bubbles you cannot remove just by pressing them out.

Please note these are actual pictures of our colors.  Due to the inaccuracy of lighting, different monitor settings, etc... these are for reference only.