These high quality, computer-cut decals are designed to be applied the body of the car, or any other smooth, hard surface. These are available in 3 different sizes and sold as a pair.
This is and official GM Licensed licensed product.
Available in over 30 colors with a lifetime warranty.
- A quantity of 1 is for 2 RS decals or 2 SS decals.
Application Area Suggestions
--------------------------------------------------------------------------------------------------
- Side of the cowl hood.
- Back of the Trunk Lid
- Dash Board (SS models)
- Engine Bay
- Engine Cover (3" pictured)
- Fenders- under the CAMARO emblem
Application areas are endless! These are just some popular locations.
Product Installation Instructions
General suggestions for the installation:
1. We recommend washing the entire car first. Next, clean the application areas (badges, indents, etc…) with rubbing alcohol several times to remove any other oil or dirt. Q-Tips help with cleaning out crevices. Be sure there is no alcohol or water on the badge during the decal application.
2. For best results, work in a relatively warm, dry area and allow the working surface to change to the room temperature before application. It's recommended to work in 50 ° F or warmer) temperatures.
Product-specific recommendations:
SS, RS Decals
• The decal is sandwiched between the mask (clear cover) and the backing. Carefully peel away the backing. Be careful not to let the decal touch the application surface until you are ready to apply. Once you are sure of the alignment and location, apply the decal. Press firmly, remove the masking, then press it down again.
Vehicle-Specific Decals & Shirts 
