These decals are designed to perfectly overlay the raised CHEVROLET lettering on the factory engine cover of your V8 Camaro SS.
This is and official GM Licensed licensed product.
Available in over 30 colors with a lifetime warranty.
- Sold as a pair. A quantity of one will give you two CHEVROLET decals- one for each side of the engine cover.
For a limited time, get a FREE V8 overlay for the V8 on the front of your engine cover. When you order, if you want a different color V8, just specify in the notes section at the checkout.
Product Installation Instructions
General suggestions for the installation:
We recommend washing the entire car first. Next, clean the application areas (badges, indents, etc…) with rubbing alcohol several times to remove any other oil or dirt. Q-Tips help with cleaning out crevices. Be sure there is no alcohol or water on the badge during the decal application.
For best results, work in a relatively warm, dry area and allow the working surface to change to the room temperature before application. It’s recommended to work in 50° F or warmer) temperatures.
CHEVROLET™ Engine Cover Overlays
· It is ABSOLUTELY ESSENTIAL that you thoroughly clean the engine cover lettering with rubbing alcohol prior to installation. We also recommend lightly sanding the surface of the letters with 600 grit sanding paper, and then cleaning with alcohol. The paint used on the engine cover is extremely “slick” and this makes the initial installation difficult. Sanding removes the “slickness” and gives the decals something to “bite” into to stick.
· The decal is provided in 2 sections to ease installation. The “CHEVR” and “OLET” sections are sandwiched between the mask (clear cover) and the backing. Carefully peel away the backing. Line the decal up over the engine cover by looking through the mask. Be careful not to let the decal touch the cover until you are ready to apply. Use the first letter as a reference. Once that letter is lined up, lightly tack it down, and line up the next. Keep repeating until finished. Always use the letters as reference before tacking down.
· Some may find it easies to apply letter-by-letter, so applying one letter then removing the masking is an option.
· The C and E have thin areas that you may need to go back and firmly press down after removing the masking.
Vehicle-Specific Decals & Shirts 
