High quality,computer-cut vinyl designed to fit perfectly in the indentations the XTREME, S10 (or BLAZER) and Bowtie embossed in the front license plate filler.
Choose the kit type below for your S-10 or Blazer.
Product Shipping Information
This item ships for FREE via USPS First-Class Mail. Contact us if you would like an alternate shipping method.
This item ships the same or next shipping day!
Product Installation Instructions
General suggestions for the installation:
1. We recommend washing the entire car first. Next, clean the application areas (badges, indents, etc…) with rubbing alcohol several times to remove any other oil or dirt. Q-Tips help with cleaning out crevices. Be sure there is no alcohol or water on the badge during the decal application.
2. For best results, work in a relatively warm, dry area and allow the working surface to change to the room temperature before application. It's recommended to work in 50 ° F or warmer) temperatures.
3. Before peeling off the backing, check the positioning.
4. When applying, work from top to bottom or left to right, holding the unapplied material away from the surface. Most colors (except Black and Lemon Yellow) will stretch a bit if absolutely necessary.
5. After Application, be sure to press the labels down firmly to ensure no air bubbles get trapped and to make sure the adhesive sticks. It's critical that you rub down the whole decal firmly to activate the adhesive and let the decal sit for at least 15 minutes before removing the mask (if it has one).
6. Try to let the adhesive set for 24 hours before washing the car again after decal application.
Product-specific recommendations:
Chevrolet ® S-10 ™ Xtreme ™ Front Kit
• It's easiest to remove the front plate cover (if possible) and work indoors on a solid surface.
• Be sure to clean the indents several times with rubbing alcohol.
• Use a Q-Tip to press the decals into the indents.
• An extra “E” is included .
Chevrolet ® Blazer ™ Xtreme ™ Front Kit
• It's easiest to remove the front plate cover (if possible) and work indoors on a solid surface.
• Be sure to clean the indents several times with rubbing alcohol.
• Use a Q-Tip to press the decals into the indents.
Vehicle-Specific Decals & Shirts 
