Choose from "SUPERCHARGED" , "INTERCOOLED" , "TURBOCHARGED". Apply these high-quality, computer-cut decals to any smooth, hard surface.
Be sure to select the appropriate size for where you'd like to apply this. Suggestions are below.
Email us to request a custom size or custom text!
Application Area Suggestions:
5.8" Size
- Front license plate cover.
- Above the trunk badge.
- Front bumper, just below the fender line
- On the fender
7" Size
- Tail Light.
- Front license plate cover
- Just under the trunk lid.
8 1/2" Size
- Rear bumper just under the trunk lid.
14 3/4" Size
Product Installation Instructions
General suggestions for the installation:
1. We recommend washing the entire car first. Next, clean the application areas (badges, indents, etc…) with rubbing alcohol several times to remove any other oil or dirt. Q-Tips help with cleaning out crevices. Be sure there is no alcohol or water on the badge during the decal application.
2. For best results, work in a relatively warm, dry area and allow the working surface to change to the room temperature before application. It's recommended to work in 50 ° F or warmer) temperatures.
3. Before peeling off the backing, check the positioning.
4. When applying, work from top to bottom or left to right, holding the unapplied material away from the surface. Most colors (except Black and Lemon Yellow) will stretch a bit if absolutely necessary.
5. After Application, be sure to press the labels down firmly to ensure no air bubbles get trapped and to make sure the adhesive sticks. It's critical that you rub down the whole decal firmly to activate the adhesive and let the decal sit for at least 15 minutes before removing the mask (if it has one).
6. Try to let the adhesive set for 24 hours before washing the car again after decal application.
Vehicle-Specific Decals & Shirts 
